Industrial

Air / Water Delivery Green Stripe

Heavy Duty general purpose water discharge hose. Black / Green stripe, Black SBR tube and cover, synthetic ply reinforcement, Black cover, temp range -40 to +85 C.

I.D ranging from 12 to 250 mm.

Water Suction / Delivery

Heavy Duty Water Suction and Delivery Hose for full suction and high discharge pressures. Black SBR tube and cover, synthetic ply reinforcement, incorporating Steel Helix, Black with Green Stripe. Temp range 40 to +85 C.

I.D ranging from 20 to 250 mm.

Corrugated Water Suction With Soft Ends (Cuffs)

Designed for water suction and discharge service where a flexible but durable hose application is needed. Supplied with cuffed ends for ease of fitting installation. Black SBR tube and cover (corrugated), synthetic ply reinforcement incoporating Steel Helix, temp range -35 to +70 C.

I.D ranging from 76 to 200 mm.

Black General Purpose Air / Water

General purpose black air and water delivery hose that is suitable for many agricultural chemicals. Black EPDM tube and black cover, synthetic ply reinforcement, temp range -40 to +100 C.

I.D ranging from 10 to 25 mm.

Working Pressure is 200 psi.

Pressure Washer Hose Blue

Blue non marking, oil resistant hose for use on pressure washer machines up to 3000 psi. Black Neoprene tube and blue Neoprene cover, one wire braid reinforcement, temp range -40 to +120 C.

I.D ranging from 6.4 to 12.7 mm.

Working Pressure is 3000 psi.

Yellow Pneumatic / Jack Hammer Hose

Economical air & water hose. It is suitable for industrial, construction and agricultural applications. Black SBR tube and yellow cover, synthetic ply reinforcement, temp range 0 to +70 C.

Assemblies available.

I.D ranging from 12 to 25 mm.

Hot Air Blower

Applications requiring conveyance of hot air with high temperatures. Black EPDM heat resistant tube and cover, synthetic ply reinforcement, temp range -40 to +180 C.

I.D is 76 mm.

 

Working pressure is 150 psi.

Push Lock Jiffy Hose (MSHA Approved)

Oil resistant hose for use with air tools to convey water mild chemicals and various petroleum products. Light and flexible tube and cover are RMA (Class A) high oil resistance, synthetic ply reinforcement, temp range -40 to +100 C. MSHA approved.

Large range of lock-on couplings to suit.

I.D ranging from 5 to 19 mm.

'

Working Pressure is 300 psi.

Oil Delivery

Delivery of a wide range of petroleum products up to a 50% aromatic content. Black Nitrile tube and cover, synthetic ply reinforcement, temp range -15 to +70 C.

I.D ranging from 19 to 100 mm.

Oil Suction / Delivery

Oil hose for use with hydraulic systems as an oil return hose or various petroleum products. Black Nitrile tube and cover, synthetic ply reinforcement incorporating Steel Helix. Suitable for petroleum products up to 50% aromatic content. Temp range -20 to +75 C.

I.D ranging from 19 to 150 mm.

Marine Exhaust - Lloyd's Approved

For the conveyance of water, engine intake, bilge exhaust, toilet, holding tank and scupper lines. Black Nitrile tube and cover, synthetic ply reinforcement incorporating Steel Helix. Temp range -30 to +100 C. SAE J2006/R2.

I.D ranging from 25 to 203 mm.

Multi-Purpose Red Oil Resistant

Premium multipurpose hose for use in air, water, oil and many chemical applications. Black Nitrile and red neoprene cover, synthetic ply reinforcement. Temp range -29 to +100 C. Non Conductive at 1000 Volts DC.

I.D ranging from 6 to 25 mm.

Working Pressure is 300 psi.

Twin Line Welding Hose (Meets AS 1335)

Premium Welding Hose that meets all of the requirements of AS1335 and can be used for portable and in line gas welding service. Black SBR tube and red (acetylene) blue (oxygen) Neoprene cover, synthetic ply reinforcement, temp range -40 to +82 C.

I.D is 5 mm.

Working Pressure is 175 psi.

FDA White Washdown (smooth cover)

Designed for floor and equipment in dairies, creameries, food processing plants and paper mills. White EPDM tube and cover, synthetic ply reinforcement, temp range -20 to +100 C.

I.D ranging from 12 to 25 mm.

Working Pressure is 200 psi.

Steel Steam 270 psi

Tube: Extruded Black conductive EPDM

Reinforcement: High tensile steel wire braids

Cover: Wrapped red EPDM - heat, abrasion and ozone resistant - pin pricked 

Use: Saturated and superheated steam

Safety factor: 10:1

Temperature: -40°C to + 210°C (suitable for intermittent temperatures up to 232°C

I.D ranging from 12 to 76 mm.

Hot Water / Steam FDA

White EPDM food grade tube with high tensile textile cord reinforcement. Specially designed for wash down use in the food and dairy industry.

I.D ranging from 12 to 25 mm.

 

Working pressure for Steam is 90 psi and hot water is 225 psi.​

Brewers Suction / Delivery Hose - Red

Flexible Suction & Delivery hose suitable for conveying beer, wine, vinegar, soft and alcholic drinks and portable water. White FDA Nitrile tube, red cover incorporating twin steel helix, temp -30 to +80 C.

I.D ranging from 25 to 102 mm.

Working pressure is 150 psi.

Sand & Shot Blast

Abrasive material blasting is designed for long service life in heavy duty applications. Premium black conductive NR tube (ISO 4649/A). temp range -40 to +80 C.

 

I.D ranging from 12 to  mm. 

Working pressure is 150 psi.

Muff Coupling

Dry material suction and delivery hose. Suitable for transfer of dry cement, sand, gravel, feed and seeds. Black SBR abrasion resistant tube and cover, synthetic ply reinforcement with steel helix, temp range -35 to +70 C.

I.D ranging from 75 to 250 mm.

Dry Material (Pneumatic Transfer)

Bulk Handling Hose for the discharge of dry bulk cement, sand, gravel and other abrasive material. Black Synthetic rubber abrasion resistant static conductive tube and black cover, synthetic ply reinforcement, temp range -32 to +82 C.

I.D is 100 mm.

 

Paint Fluid Hose

Nylon tube ensures this hose is suitable for both water and oil based paints. Transparent Nylon tube and black rubber cover, synthetic, high tensile textile cord, temp range -40 to +66 C.

I.D ranging from 6 to 19 mm.

Please reload

© 2023 by Hardie Hose.